The SaunaLife CL3G is a 2-person outdoor cube sauna kit with a full-height bronze-tinted glass front, a knotless Thermo-Aspen bench and a solid Thermo-Spruce shell under a shingle roof. It measures 53.2" W × 51.2" D × 81.9" H on the outside and 49.6" W × 43.2" D × 75.4" H inside. The kit includes the shell, the glass front and door, the bench, backrest, a floor drain and Wi-Fi-controlled LED lighting, and ships flat-packed by LTL freight at 990 lbs. The electric heater and its controls are chosen separately.
The CL3G is the smallest room in SaunaLife's Cube Luxury Series and the one that fits where a 4- or 6-person cabin will not: its footprint is 53.2" × 51.2", roughly 19 square feet, while interior height stays at 75.4" so an adult of about 6'3" still stands upright inside. Handcrafted in Northern Europe from thermally modified woods, it is built to stay outdoors year-round.
How the SaunaLife CL3G is built
The CL3G uses a different material for each job: thermally modified spruce where the sauna meets the weather, knotless thermally modified aspen where skin meets the bench, and tempered glass across the front wall.
-
Panoramic glass front: a full-height wall of 0.31" tempered, bronze-tinted glass, including the door.
-
Thermo-Spruce shell: 1.65" solid staves on the side walls and a 1.1" board wall at the back. Thermal modification changes the wood's cell structure with heat rather than chemicals, which reduces moisture absorption and improves resistance to decay and insects outdoors.
-
Knotless Thermo-Aspen interior: the bench, the side bench and the backrest use satin-smooth knotless Thermo-Aspen, selected to give a cooler-to-the-touch seating surface.
-
Shingle roof: shingles over an underlay felt layer with a fascia board and drip rails — the same roofing material used on houses, rather than a temporary membrane cover.
-
Wi-Fi LED lighting: a dotless white LED bar system controlled from a phone app or the included wireless remote.
-
Ventilation and drainage: one adjustable rotary vent at high level, three louvered grilles at low level, and a floor drain.
Natural or black finish
The SaunaLife CL3G is sold in two finishes. Natural leaves the exterior wood unpainted. Black (CL3GB) is the same kit with two 2.7-liter (0.7-gallon) cans of PROSAUNAS SaunaShield black sauna paint added. The sauna is not painted at the factory: you paint the exterior yourself during assembly. SaunaShield's painting guide recommends building the shell first, applying at least two coats, and fitting the door, trim and roofing once the paint is dry. SaunaShield is for exterior surfaces only, so the interior is unpainted in both finishes.