How is Harvia The Wall installed?
Harvia The Wall hangs on its supplied wall mount, fixed horizontally to the wall so that the heater is not held by the wall panel alone; the mount keeps the heater 3.15" (80 mm) above the floor. A sauna room takes only one electric heater, and the floor under it should be heat-resistant. Harvia's manual says only a licensed electrician may connect the heater, permanently, with no plug in the sauna room. Your licensed electrician sizes the breaker and wire from the manual that ships with the heater and your local code. Harvia's installation manual, under Documents, gives the exact mounting and wiring details.
Harvia The Wall safety distances
Keep at least these distances between Harvia The Wall and walls, benches and anything that can burn. They are the same for the 6 and 8 kW.
Harvia The Wall minimum safety distances (Harvia The Wall manual Y05-0859, Figures 3 and 4)
| Heater side to a side wall, and heater front to a bench |
2.95" (75 mm) |
| Heater front to a bench or shelf above the top of the heater |
9.84" (250 mm) |
| Top of the heater to the ceiling |
44.1" (1,120 mm) |
| Bottom of the heater to the floor |
3.15" (80 mm) |
| Heater fence |
Required: Harvia's manual says a fence is necessary for safety. Softwood, attached to the wall, at least 3" (75 mm) from the heater on every side, its top 1" (25 mm) below the top of the heater; not included |
| Sauna room height |
At least 75" (1,900 mm); Harvia's room guidance keeps the ceiling no higher than 7' 6" (2,300 mm) |


Does the sauna room need ventilation?
Yes. Harvia's manual for The Wall calls for adjustable vents that change the air five times an hour: a lower vent close to the heater and an upper vent on the opposite wall. The manual gives their positions.