Penguin Chiller
- 3/4 HP high-efficiency compressor
- 7,500 BTU/hr cooling capacity
- Operates at 56 dBA (quiet)
- 110–120V / 450W / 3.9 Amps
- Dimensions: 17” W x 15” D x 13” H
- Weight: 49 lbs
- Built-in circulation pump
- 10-foot power cord with GFCI protection
- Rain-resistant housing*
- 1-year product warranty
- Made in the USA
- Important: Always disconnect and drain the chiller when temperatures may drop below freezing to prevent damage.
Why Use a Chiller Instead of Ice?
Whether you're just starting cold therapy or have been doing it for years, you’re likely in it for the health benefits — not the hassle of hauling bags of ice. Keeping a tub cold with ice is time-consuming, expensive, and inconsistent. The Coldture Chiller eliminates all of that. It keeps your water cold automatically, helping you build a more consistent routine and get the most out of your cold therapy practice.
Performance
This unit can chill water into the low 40°F range and, under the right conditions, even into the high 30s. The biggest factors affecting performance are ambient air temperature and sun exposure — not your body heat. If you're running a 100-gallon setup, even in full sun, expect water temps in the low to mid-40s with proper insulation and shade. Use indoors or outdoors, but avoid freezing environments.
Operating Costs
At around $0.12 per kWh, expect to pay between $18–$28 per month to operate the chiller. Only the pump runs continuously; the compressor and fan kick on only when cooling is needed.
Should You Use a Timer?
A common question we get is whether to run the chiller on a timer. Our recommendation: keep it running. Here's why:
-
Cold water slows bacterial growth, keeping the tub cleaner for longer and reducing the need for frequent water changes or high sanitizer doses.
-
Power savings are minimal. Turning it off might save you $3–$5 per month, but you’ll likely spend more on maintenance.
-
Startup stress wears down the pump. Most pump failures happen at startup. Frequent cycling increases wear and tear and shortens the lifespan of your unit.
Installation Note
The built-in pump is not self-priming. Your system must be gravity-fed:
- Place the chiller within 3 feet of the tub drain
- The bottom of the chiller must be level with or below the bottom of the tub
- Avoid long tubing runs from the tub drain to the chiller inlet, as this can reduce water flow and damage the pump
Coldture Water Chiller Pro
The Coldture Water Chiller Pro is designed for those who want a reliable, clean, and consistent cold plunge experience at home. This powerful, compact unit can chill water down to 3°C (37°F) for a true deep cold immersion or heat it up to 40°C (105°F) for recovery. With Wi-Fi control and a digital display, you can easily dial in your ideal temperature from anywhere. Built with industrial-grade components, it’s tough enough for daily use indoors or out. Setup is simple—just plug it in and go.
Key Features
- Cools water down to 3°C (37°F)
- Heats water up to 40°C (105°F)
- Advanced multi-stage filtration
- Compact, all-in-one portable design
- Plug-and-play with self-priming circulation pump
- Wi-Fi enabled temperature control and digital display
- For indoor and outdoor use (operates in temperatures as low as -10°C / 14°F)
- Built-in safety shutoff
- Durable, industrial-grade components
- Two-year standard warranty (filters excluded)