The advantages of lithium power station compared with gasoline generator?
It has below advantage compared with gas generator: More compact and lightweight Zero emissions, Eco-friendly No fumes, Cost-efficient, less maintenance Flexible recharge from AC/Car/Solar Silent operation
What types of devices can your power station charge?
The power station can charge all kinds of devices such as CPAP, Laptop, Phone, tablet, led lamp, drone, car mini fridge, Gopro, SPEAKER, TV screen, Camera, etc.
How long can the power station run my device?
You can roughly calculate the charging time: you need to do some search or check the power of your device, it should not be exceed our max. power limits. charge time(rough calculated) = our power station Wh* 0.85 / operating power of your device This is the theoretical value calculated: charge it without using it. Actual working time may varies on how you use the device, pls inquiry seller for details.
The advantages of lithium power station compared with gasoline generator?
Our Power Stations featured with multiple Outputs: AC, DC, and a USB port that can power up all kinds of small electronic gadgets ranging from laptops, smartphones, drones, go-pros, cameras, CPAP and much more.
How to recharge for our power station?
Our power station can be recharged by AC adapter, solar charger and car charger. Some models can be charged by the Generator Recharge, dual AC charging or dual PV charging. Pls check with the seller before purchasing.
How to choose the third party solar panel?
Make sure it meets the below: 1) Open Circuit Voltage (OCV) is within our input voltage range, 2) the current and power not exceed our max. input current/power limits, 3) with the same power connector (MC4 or Anderson)
Do AC300 and B300 support hot swapping?
Yes.
Can I connect the B230 battery with AC300?
No. AC300 is compatible with B300 / B300S ONLY.
How many B300 / B300S batteries can I connect with AC300? Can I mix them?
AC300 accepts up to 4 B300 / B300S batteries. You can also mix them in a power system. However, the B300S capabilities will be limited while working with AC300.
Does AC300 support remote App control?
Yes. Connect via WiFi or Bluetooth, the BLUETTI App allows you to control the AC300+B300 remotely, like switching the working modes and upgrading the firmware.
How to recharge AC300 rapidly?
Recharge it with the wall outlet and solar panels at the same time, then you will get a maximum 5,400W input.
Does AC300 have UPS function?
Yes. lt supports 4 UPS modes:
1. Standard UPS (Recommended for regions with unstable grid power supply)
2. Time Control UPS (Charge the system during off-peak hours and power your loads when electricity prices are high)
3. PV Priority UPS (Recommended for regions with sufficient solar energy)
4. Customized UPS (Flexible to tailor the system based on your energy plan)
What can I do with the touchscreen?
For details, please refer to the AC300 touchscreen guide below: AC300 Touchscreen Guide
What cables are included in the package?
Standard Packaging
AC300
1. 15A AC Charging Cable: 59in / 150cm
2. DC Input Cable: 59in / 150cm
3. Car Charging Cable: 20in / 50cm
B300
P090D Battery Expansion Cable: 31.5in / 80cm
Solar Charging Cable: 70cm
Can I purchase the AC300 separately and use it alone?
No. The AC300 has no built-in battery, you can use it by pairing with B300 / B300S expansion battery.
What kind of cables are required for connecting AC300 to B300 or B300S?
The P090D cable is required for connecting AC300 with B300, while connecting with B300S, P150D to P090D cable is required.
What is the UPS switching time?
20ms.
How to build a 240V / 6kW power system?
Use the Fusion Box (P030A) to connect 2 AC300 units in series.
How long can the AC300+B300 run my home appliances? (Eg: refrigerator, A/C, freezers, lights)
Runtime = 3,072Wh* × DoD × η ÷ (load power + self-consumption)
Note:
1) DoD refers to the Depth of Discharge, η is the local inverter efficiency. DoD=90%, η=90%.
2) The above data is for reference ONLY.
What is the self-consumption of the AC300?
When the AC300 is on standby, it's 20W with AC and DC off, and 50W with AC and DC on.
How long does it take to fully charge the AC300+B300?
Charging time (estimated) = (total capacity / charging power) + trickle charge time
The trickle charge time for BLUETTI power station is typically 0.5-1 hours.
What is the max charging power of AC300?
1. 3,000W Max. with 1* B300 (PV+AC);
2. 5,400W Max. with 2* B300 or more (PV+AC).
How many solar panels can I connect with AC300+B300? How to connect them? Can the solar input current exceed 15A? Can the solar input power exceed 2,400W?
1. AC300 support dual MPPT, each MPPT of AC300 accepts 1-6* PV120 / 1-5* PV200 / 1-3* PV350 / 1-3* PV420 solar panels.
2. Series connecting is highly commended for the best efficiency and durability.
3. Yes, but the extra current will be wasted.
4. Yes, however, please ensure the total voltage does not exceed 150V.
Can l use third party solar panels to charge AC300?
Yes, as soon as the solar panels meet the following conditions:
1) Total Voc: 12V-150V
2) Total power: 2,400W Max.
3) With MC4 connectors
Can l use rooftop solar panel to charge AC300?
Yes, as soon as your solar roof meet the following conditions:
1. Total VOC 12V~150V
2. With MC4 connectors
Note:
1) The AC300 can be charged by microinverter ONLY through an AC outlet rather than directly charging,
2) When the VOC exceeds 150V, the BLUETTI D300S is required to step down the voltage to achieve solar charging (sold separately).
Can I charge the system by connecting the expansion battery to solar panels or an adapter?
Yes. However, in this case, the AC300 will not display the charging power.
How to maintain and store the AC300+B300?
1. When the SoC drops to 5%, please charge the product immediately.
2. Before storing the product, charge it to 60% SOC to keep it in optimal condition. In addition, power off the unit and disconnect all electrical connections from it.
3. Store the product in a cool and dry place, keeping it away from flammable or combustible materials and gases.
4. The power station can be safely stored within a temperature range of -20°C to 45°C ( -4°F to 113°F). However, if the storage duration exceeds one month, it's recommended to maintain an ideal storage temperature of around 30°C (86°F).
5. Fully cycle the product every 3 months to maintain the battery's health.
Can I connect different types of solar panels to the AC300?
Yes. AC300 features dual MPPT charge controllers, please ensure the solar panels in each controller are consistent.
What to consider when recharging the AC300+B300 from a generator?
1. The generator's output voltage, and frequency should fall within the range of AC300.
2. If your generator's output power can't meet the AC300's input specs, you can easily adjust the Maximum Grid Input Current via the app. This ensures your generator can still efficiently charge the AC300.
3. Use a generator with sine wave output.
Can I charge the AC300 from solar panels, a car, and AC power simultaneously?
Yes.
Can I charge AC300 via 12V / 24V DC / DC charger / MPPT controller / solar controller?
Yes. However, the Max. charging power is limited to 100W (12V) or 200W (24V). Please set the "DC input source" to "Others".
How to build up a Split Phase System? What are the benefits?
A Split Phase System can reach up to 6kW of output power and up to 24,576Wh of capacity for high-wattage loads and longer runtime.
ls AC300 waterproof?
No, please use and store it in a cool and dry place.
