{"product_id":"saunalife-titan-sl1-propane-gas-sauna-heater","title":"SaunaLife Titan SL1 | Portable Propane Gas Sauna Heater","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SaunaLife Titan SL1 is a portable propane sauna heater. It burns propane (LP) from a standard cylinder placed outside the sauna, produces up to 8.1 kW (27,600 BTU\/h) on High and Low settings, and heats sauna rooms of 140–350 cu ft uninsulated or 140–425 cu ft insulated. It needs no electrical connection and no chimney: combustion air comes in through a lower vent and leaves through an upper vent to the outdoors. The Titan weighs 33 lb without stones, holds 44 lb of 1\"–2\" sauna stones, and is built from 310S and 304 stainless steel.\u003c\/p\u003e\n\u003ch3\u003eWhere can you use the SaunaLife Titan SL1?\u003c\/h3\u003e\n\u003cp\u003eSaunaLife's manual approves the Titan SL1 for two settings: a properly constructed sauna room or cabin that meets its clearance and ventilation requirements, and SaunaLife's own SaunaTrekker and SaunaTrekker XL sauna tents. With no wiring or flue to disconnect, the same heater can move between the two; SaunaLife sells it as a portable heater for exactly that. It must not be installed in living areas or any indoor space not built for sauna use, and SaunaLife does not allow third-party, modified or substitute tents.\u003c\/p\u003e\n\u003ch3\u003eWhat does the Titan SL1 need instead of wiring or a chimney?\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1 replaces an electrical circuit and a chimney with three requirements of its own: permanent lower and upper ventilation openings, with the exhaust discharging directly outdoors; a propane cylinder outside the sauna, connected with the regulator and 6 ft hose supplied; and a stable, level, non-combustible surface to stand on. Those are the trade-offs to plan for against an electric heater, which needs a dedicated circuit, or a wood stove, which needs a chimney and firewood.\u003c\/p\u003e\n\u003ch3\u003eHow long does a propane tank last in the Titan SL1?\u003c\/h3\u003e\n\u003cp\u003eSaunaLife rates a standard 20 lb propane cylinder at about 15 to 25 hours of sauna in the Titan SL1, depending on room size and the heat setting used. The cylinder is not included. The Titan runs on propane (LP) only, and its low-pressure regulator connects directly to the cylinder valve; SaunaLife's manual says to use the regulator and hose as supplied and not to substitute or modify either one.\u003c\/p\u003e\n\u003ch5\u003eSafety \u0026amp; Features\u003c\/h5\u003e\n\u003ch3\u003eWhat safety features does the SaunaLife Titan SL1 have?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen depletion sensor (ODS):\u003c\/strong\u003e shuts off the gas if the oxygen level in the room drops below a preset threshold. SaunaLife describes it as a supplemental device that does not replace the required ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal tip switch:\u003c\/strong\u003e cuts the gas if the heater is tilted or knocked off level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-minute timer:\u003c\/strong\u003e sets the run time for each session, up to 60 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater guard:\u003c\/strong\u003e a curved alder guard that clips onto the stone basket to help prevent contact with it. One is included, and up to three can be fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-resistant gloves:\u003c\/strong\u003e included, for handling the heater, the stones and metal parts, which stay hot long after shutdown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSaunaLife says every Titan SL1 has its safety features tested before it leaves the factory.\u003c\/p\u003e\n\u003ch3\u003eRules for using the Titan SL1 safely\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNever leave the Titan SL1 running unattended, and never sleep in the sauna while it is operating.\u003c\/li\u003e\n\u003cli\u003eKeep both ventilation openings fully open and unobstructed whenever the heater is on.\u003c\/li\u003e\n\u003cli\u003eKeep the propane cylinder outside the sauna room or tent, upright and secured.\u003c\/li\u003e\n\u003cli\u003eIf anyone develops a headache, dizziness, weakness, nausea, sleepiness or confusion, shut the heater off, move to fresh air and seek medical attention if symptoms persist. These can be signs of carbon monoxide exposure.\u003c\/li\u003e\n\u003cli\u003eIf you smell gas, shut off the gas supply, put out any open flame and ventilate the area; do not use the heater again until the leak has been found and fixed.\u003c\/li\u003e\n\u003cli\u003ePour water onto the stones slowly to avoid a sudden burst of steam.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTitan SL1 controls\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1 has a 60-minute timer, a push-button igniter and a gas control knob with four positions: Off, Position 1 to light the pilot, Position 2 for High heat and Position 3 for Low heat. All the controls sit on a box at the base of the heater, which the manual says must stay easy to reach and not be blocked by benches, walls or fixtures.\u003c\/p\u003e\n\u003ch3\u003eStones and steam\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1's stainless-steel stone basket holds 44 lb of 1\"–2\" (3–5 cm) stones around its radiant heat chamber. Once the heater reaches operating temperature, ladle small amounts of clean water onto the stones for steam. For continuous humidity, the optional \u003ca href=\"\/products\/saunalife-titan-sl1-water-tank\" title=\"SaunaLife Titan SL1 Water Tank\"\u003eTitan SL1 Water Tank\u003c\/a\u003e holds 1.3 gallons of water under the stone basket and releases steam as it heats, with a spigot for drawing hot water.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1 is built from 310S and 304 stainless steel, per SaunaLife's manual, with brass components, per SaunaLife. SaunaLife says it developed the heater with Finnish sauna engineers.\u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003ch3\u003eWhat comes with the SaunaLife Titan SL1?\u003c\/h3\u003e\n\u003ch4\u003eIncluded in the box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeater base with burner\u003c\/li\u003e\n\u003cli\u003eRadiant heat chamber\u003c\/li\u003e\n\u003cli\u003eStainless-steel stone basket\u003c\/li\u003e\n\u003cli\u003ePropane regulator and 6 ft hose\u003c\/li\u003e\n\u003cli\u003eOne alder heater guard with clips\u003c\/li\u003e\n\u003cli\u003eHeat-resistant gloves\u003c\/li\u003e\n\u003cli\u003eInstallation and Operation Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot included — ordered or arranged separately\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSauna stones (required):\u003c\/strong\u003e 44 lb of 1\"–2\" stones. They come in 33 lb boxes, so the Titan needs two boxes of \u003ca href=\"\/products\/saunalife-sauna-stones-rounded-olivine-diabase-1-2-inch-33-lb\" title=\"SaunaLife Rounded Olivine Diabase Sauna Stones\"\u003eSaunaLife rounded sauna stones\u003c\/a\u003e, with some left over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropane cylinder (required):\u003c\/strong\u003e a standard 20 lb cylinder is the size SaunaLife rates its run time against.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat shield (optional):\u003c\/strong\u003e the \u003ca href=\"\/products\/saunalife-titan-sl1-heat-shield\" title=\"SaunaLife Titan SL1 Heat Shield\"\u003eTitan SL1 Heat Shield\u003c\/a\u003e reduces the side and rear clearance in a sauna cabin from 6\" to 4\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater tank (optional):\u003c\/strong\u003e the \u003ca href=\"\/products\/saunalife-titan-sl1-water-tank\" title=\"SaunaLife Titan SL1 Water Tank\"\u003eTitan SL1 Water Tank\u003c\/a\u003e adds continuous steam and a hot-water spigot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra heater guards (optional):\u003c\/strong\u003e up to two more \u003ca href=\"\/products\/saunalife-titan-sl1-heater-guard-alder\" title=\"SaunaLife Titan SL1 Heater Guard\"\u003eTitan SL1 Heater Guards\u003c\/a\u003e, for three in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent covers for a sauna cabin:\u003c\/strong\u003e the manual recommends intake and exhaust vent covers (a 12\" × 12\" intake set and a 10\" × 10\" exhaust set). They are not sold on topture.com; contact us if you need them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor protection, where needed:\u003c\/strong\u003e a non-combustible floor surface or floor protection if the sauna floor is combustible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;table-layout:auto;margin:0 0 20px;font-size:15px;\"\u003e\n\u003ccaption style=\"caption-side:top;text-align:left;padding:0 0 10px;font-size:13px;color:#666;\"\u003eSaunaLife Titan SL1 gas sauna heater specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eModel\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eTitan SL1 (SaunaLife part 130183)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eFuel\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003ePropane (LP) only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eMaximum output\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e8.1 kW (27,600 BTU\/h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eHeat settings\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eHigh and Low\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eSauna room volume\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e140–350 cu ft uninsulated; 140–425 cu ft insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eStone capacity\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e44 lb of 1\"–2\" (3–5 cm) stones, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eHeater dimensions\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e13.07\" W × 19.57\" D × 27\" H (depth includes the control box)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eDimensions with heat shield\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e16.59\" W × 21.29\" D × 27\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eWeight\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e33 lb without stones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eMaterial\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e310S and 304 stainless steel, with brass components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eControls\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e60-minute timer, push-button igniter, gas control knob (Off \/ Pilot \/ High \/ Low)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eSafety devices\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eOxygen depletion sensor (ODS), internal tip switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eGas connection\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eLow-pressure regulator and 6 ft hose, included; connects directly to the propane cylinder valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eElectrical connection\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eVentilation\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eLower intake of at least 54 sq in and upper exhaust of at least 39 sq in, exhaust discharging directly outdoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eInstallation\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003eFreestanding, portable; on a stable, level, non-combustible surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;vertical-align:top;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;width:42%;\"\u003eWarranty\u003c\/th\u003e\n\u003ctd style=\"text-align:left;vertical-align:top;padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e5 years from delivery for gas sauna heaters, residential use (SaunaLife Limited Warranty, Rev 260915)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eInstallation \u0026amp; Ventilation\u003c\/h5\u003e\n\u003ch3\u003eWho should install the SaunaLife Titan SL1?\u003c\/h3\u003e\n\u003cp\u003eSaunaLife's manual says the Titan SL1 must be installed by a person familiar with fuel-burning appliances and general gas safety practices. For installation in a sauna cabin, local building codes or regulations may require a licensed or qualified professional, so check what applies where you live before you install.\u003c\/p\u003e\n\u003ch3\u003eWhat ventilation does the Titan SL1 require?\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1 needs two permanent openings that stay fully open whenever it runs. SaunaLife specifies natural ventilation and does not recommend mechanical ventilation systems, which can interfere with the heater's combustion air.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower opening (air intake):\u003c\/strong\u003e at least 54 sq in of free area, for example a 9\" round vent or a 6\" × 9\" rectangular vent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper opening (exhaust):\u003c\/strong\u003e at least 39 sq in of free area, for example an 8\" round vent or a 5\" × 8\" rectangular vent, on the wall opposite the heater and near the ceiling.\u003c\/li\u003e\n\u003cli\u003eThe exhaust must discharge directly to the outdoors, never into another room or enclosed part of a building.\u003c\/li\u003e\n\u003cli\u003eIf the vents have screens, louvers or grilles, make them larger so the free area still meets these minimums.\u003c\/li\u003e\n\u003cli\u003eCheck that a prefabricated sauna cabin meets these minimums before installing the Titan in it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat clearances does the Titan SL1 need?\u003c\/h3\u003e\n\u003cp\u003eAll Titan SL1 clearances are measured from the outside of the stone basket to walls, benches, doors and any other combustible material. In a sauna cabin, the optional \u003ca href=\"\/products\/saunalife-titan-sl1-heat-shield\" title=\"SaunaLife Titan SL1 Heat Shield\"\u003eheat shield\u003c\/a\u003e reduces the side and rear distances.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;table-layout:auto;margin:0 0 20px;font-size:15px;\"\u003e\n\u003ccaption style=\"caption-side:top;text-align:left;padding:0 0 10px;font-size:13px;color:#666;\"\u003eTitan SL1 minimum clearances in a sauna cabin, measured from the stone basket\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:2px solid #d5d5d5;font-weight:700;\"\u003eDirection\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:2px solid #d5d5d5;font-weight:700;\"\u003eWithout heat shield\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align:left;padding:10px 0;border-bottom:2px solid #d5d5d5;font-weight:700;\"\u003eWith heat shield\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;\"\u003eLeft and right\u003c\/th\u003e\n\u003ctd style=\"padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;\"\u003e6\"\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;\"\u003eRear\u003c\/th\u003e\n\u003ctd style=\"padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;\"\u003e6\"\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;\"\u003eFront\u003c\/th\u003e\n\u003ctd style=\"padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;\"\u003e16\"\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;font-weight:700;\"\u003eCeiling\u003c\/th\u003e\n\u003ctd style=\"padding:10px 14px 10px 0;border-bottom:1px solid #e5e5e5;\"\u003e50\"\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #e5e5e5;\"\u003e50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eWith the heat shield fitted, keep at least 1\" between the shield and any wall or combustible surface; the shield must not touch or be attached to combustible material. In a SaunaTrekker tent the 6\" side, 6\" rear and 16\" front distances apply with or without the shield.\u003c\/p\u003e\n\u003ch3\u003eFloor and propane line requirements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStand the Titan SL1 only on a stable, level, non-combustible surface. It must not sit directly on a wood floor or wooden floor grate; if the sauna floor is combustible, install non-combustible floor protection first.\u003c\/li\u003e\n\u003cli\u003eKeep the propane cylinder outside the sauna, upright, secured and in a well-ventilated place.\u003c\/li\u003e\n\u003cli\u003eRoute the hose at least 12\" from the heater and away from hot surfaces, where it cannot be kinked, crushed, worn through or walked on.\u003c\/li\u003e\n\u003cli\u003eIn a sauna cabin, provide an accessible manual gas shutoff valve outside the sauna room.\u003c\/li\u003e\n\u003cli\u003eLeak-test every connection with a solution of 1 part liquid dish soap to 3 parts water after installation, after reconnecting a cylinder and after any service. Bubbles mean a leak: shut off the gas, tighten the connection and test again.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow is the Titan SL1 assembled?\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the heater base with burner in its final position on a stable, level, non-combustible base.\u003c\/li\u003e\n\u003cli\u003eSet the heat chamber onto the burner, making sure it is fully seated.\u003c\/li\u003e\n\u003cli\u003eSlide the stone basket over the heat column and turn it clockwise to lock it to the base.\u003c\/li\u003e\n\u003cli\u003eClip the heater guard onto the stone basket; its height can be adjusted.\u003c\/li\u003e\n\u003cli\u003eLoad the stones: stack them somewhat tightly with small gaps for airflow, without forcing or compacting them, and avoid large gaps, which increase direct radiant heat.\u003c\/li\u003e\n\u003cli\u003eConnect the regulator to the propane cylinder and leak-test the connections before first use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eUsing the Titan SL1 in a SaunaTrekker tent\u003c\/h3\u003e\n\u003cp\u003eIn a tent, the Titan SL1 may be used only in SaunaLife's SaunaTrekker or SaunaTrekker XL, whose ventilation openings are factory-sized for it. Place the heater in the corner of the tent that has the lower ventilation intake, on a non-combustible surface such as a stone paver and never directly on grass. Keep the propane cylinder outside the tent, bring the hose in without pinching it, and do not cover or modify the tent's vents.\u003c\/p\u003e\n\u003ch5\u003eOperation \u0026amp; Care\u003c\/h5\u003e\n\u003ch3\u003eHow do you light the SaunaLife Titan SL1?\u003c\/h3\u003e\n\u003cp\u003eBefore each use, check that the heater is assembled and stable, both vents are fully open, the clearances are clear and the gas connections are secure. Then:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the gas supply.\u003c\/li\u003e\n\u003cli\u003eSet the timer to the run time you want, up to 60 minutes.\u003c\/li\u003e\n\u003cli\u003eTurn the control knob to Position 1.\u003c\/li\u003e\n\u003cli\u003ePress and hold the control knob, then press the igniter until the pilot lights. Keep holding the knob until the pilot stays lit; if it goes out, repeat.\u003c\/li\u003e\n\u003cli\u003eTurn the knob to Position 2 for High heat or Position 3 for Low heat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTo shut down, turn the control knob to Off, turn off the gas supply and let the heater cool for at least 30 minutes before handling it, wearing the included gloves.\u003c\/p\u003e\n\u003ch3\u003eHow long does the Titan SL1 take to heat a sauna?\u003c\/h3\u003e\n\u003cp\u003eSaunaLife's manual allows about 15 to 20 minutes for the sauna to reach temperature, and SaunaLife says the Titan SL1 heats most saunas in under 30 minutes. Actual time depends on room size, insulation and the heat setting.\u003c\/p\u003e\n\u003ch3\u003eMaintaining the Titan SL1\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWith the heater off and cool, keep it clean and its airflow openings clear.\u003c\/li\u003e\n\u003cli\u003eCheck the burner area, gas hose, connections and stones regularly, and do not run the heater if any part is damaged.\u003c\/li\u003e\n\u003cli\u003eClean the burner with a soft brush or cloth and mild soapy water; clear its openings with a thin wire, never a sharp object.\u003c\/li\u003e\n\u003cli\u003eBlow dust out of the oxygen depletion sensor with compressed air; do not insert anything into it.\u003c\/li\u003e\n\u003cli\u003eReplace the gas hose every 2 years, or sooner if it shows damage, using only SaunaLife-approved parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTroubleshooting the Titan SL1\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot will not light or stay lit:\u003c\/strong\u003e check the gas supply, hold the control knob longer (60 to 90 seconds) and clean the oxygen depletion sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater shuts off while running:\u003c\/strong\u003e make sure both vents are fully open and the heater is level, since the tip switch cuts the gas when it tilts, and check the gas supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow heat or uneven heat:\u003c\/strong\u003e use the High setting, re-stack the stones more tightly and confirm the room is within the Titan's 140–425 cu ft range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas smell:\u003c\/strong\u003e shut off the gas, tighten the connections, leak-test and do not use the heater until it is resolved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003ch3\u003eHow is the SaunaLife Titan SL1 shipped?\u003c\/h3\u003e\n\u003cp\u003eThe Titan SL1 ships by parcel carrier, not LTL freight, so it arrives like a standard package. Stones, the propane cylinder and the optional accessories are separate items. Shipping cost is shown at checkout.\u003c\/p\u003e\n\u003ch5\u003eDocuments\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0542\/4037\/9061\/files\/saunalife-titan-sl1-propane-gas-sauna-heater--titan-sl1-installation-and-operation-manual--e8417fcd.pdf?v=1790357839\" title=\"SaunaLife Titan SL1 Installation and Operation Manual\" rel=\"noopener\" target=\"_blank\"\u003eSaunaLife Titan SL1 Installation and Operation Manual, SL1-REV1, September 2026 (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0542\/4037\/9061\/files\/saunalife-titan-sl1-propane-gas-sauna-heater--saunalife-limited-warranty-rev-260915--2582d06c.pdf?v=1790357846\" title=\"SaunaLife Limited Warranty\" rel=\"noopener\" target=\"_blank\"\u003eSaunaLife Limited Warranty, Rev 260915 (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"SaunaLife Saunas","offers":[{"title":"Default Title","offer_id":58876915810568,"sku":"130183","price":2998.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0542\/4037\/9061\/files\/01-SaunaLife-Titan-SL1-Propane-Sauna-Heater.jpg?v=1790357924","url":"https:\/\/topture.com\/products\/saunalife-titan-sl1-propane-gas-sauna-heater","provider":"Topture","version":"1.0","type":"link"}